Skip to content

Bibliography

Scientific references cited in the manual.

  • Barton N. and Choubey V., 1977. The shear strength of rock joints in theory and practice. Rock Mechanics, 12(1), 1-54.
  • Barton N., 2002. Some new Q-value correlations to assist in site characterisation and tunnel design. Int. J. Rock Mech. Min. Sci., 39, 185-216.
  • Bieniawski Z.T., 1976. Rock mass classification in rock engineering. In Exploration for Rock Engineering, Proc. of the Symp. (ed. Z.T. Bieniawski), 1, 97-106. Cape Town, Balkema.
  • Bieniawski Z.T., 1989. Engineering Rock Mass Classifications. Wiley, Chichester, 251 pp.
  • Harp E.L. and Noble M.A., 1993. An engineering classification to evaluate seismic rock-fall susceptibility and its application to the Wasatch Front. Association of Engineering Geologists Bulletin, V. 30, 293-319.
  • Irfan T.Y. and Dearman W.R., 1978. The engineering petrography of a weathered granite in Cornwall, England. Quarterly Journal of Engineering Geology, 11, 233-244.
  • ISRM (International Society for Rock Mechanics), 1978. Suggested Methods for the Quantitative Description of Discontinuities in Rock Masses. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 15, 319-368.
  • Jašarević I. and Kovačević M.S., 1996. Analyzing applicability of existing classification for hard-carbonate rock in Mediterranean area. EUROROCK '96, Torino, pp. 811-818.
  • McCarty J.L. and Carden H.D., 1962. Impact characteristics of various materials obtained by an acceleration-time-history technique applicable to evaluating remote targets. NASA Technical Note D-1269, June 1962, 61 pp.
  • Palmström A., 1982. The volumetric joint count — a useful and simple measure of the degree of rock mass jointing. Proc. IV Int. Congr. IAEG, New Delhi, V.221-V.228.
  • Palmström A., 1986. A General Practical Method for Identification of Rock Masses to be Applied in Evaluation of Rock Mass Stability Conditions and TBM Boring Progress. Proc. Conf. Fjellsprengingsteknikk, Bergmekanikk, Geoteknikk, Oslo, pp. 31.1-31.31.
  • Paronuzzi P., 1989. Criteri di progettazione delle opere di difesa dalla caduta massi: la valutazione della forza d'impatto dei blocchi. Quaderni di Geologia Applicata.
  • Priest S.D. and Hudson J.A., 1981. Estimation of Discontinuity Spacing and Trace Length Using Scanline Survey. Int. J. Rock Mech. Min. Sci., 18, 183-197.
  • Robertson A.M., 1988. Estimating weak rock strength. In: Sastry K.V.S. (Ed.), Proceedings of the SME Annual Meeting, Society of Mining Engineering, Phoenix, pp. 1-5.
  • Romana M., 1985. New adjustment ratings for application of Bieniawski classification to slopes. Proc. Int. Symp. on the Role of Rock Mechanics in Excavations for Mining and Civil Works, ISRM, Zacatecas, pp. 49-53.
  • Sen Z. and Kazi A., 1984. Discontinuity spacing and RQD estimates from finite length scanlines. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 21(4), 203-212.
  • Sen Z. and Sadagah B.H., 2003. Modified rock mass classification system by continuous rating. Engineering Geology, 67(3-4), 269-280.
  • Serafim J.L. and Pereira J.P., 1983. Consideration of the geomechanics classification of Bieniawski. Proc. Int. Symp. Eng. Geol. Underground Constr., Lisbon, 1, II.33-II.42.
  • Singh B. and Göel R.K., 1999. Rock Mass Classification — A Practical Approach in Civil Engineering. Amsterdam, Elsevier.
  • Wickham G.E., Tiedemann H.R. and Skinner E.H., 1972. Support determination based on geologic predictions. Proc. North American Rapid Excav. Tunneling Conf., Chicago (eds K.S. Lane, L.A. Garfield), 43-64. New York: Soc. Min. Engrs.

Found an error on this page? Let us know.